1 PIECE STEEL DRIP TRAY - NOS - Green Mountain Grill Davy Crockett

Description: I have stock that I need to clean out. This is based from the original design of the Davy Crockett grill before the current version of the stainless steel version that came out after this version. I think the current stainless steel design came out in about 2015-2016 for reference purposes. NOTE - IMPORTANT - This is a steel (not stainless steel) 1 PIECE DRIP TRAY for a Davy Crockett Green Mountain Grill. This was originally supposed to be a 2 piece set, but we don't have the top halves anymore, so in order to make this order "normally", you will need to cover the tray (what you see in the picture) with a sheet or two of aluminum foil so that it blocks off the holes in the tray so your grill will operate "normally". If you wish to sear, all that would be required is to remove the sheet of aluminum foil and it will allow more heat up the center of the grill for searing purposes. Measurements below is the drip tray, so you can see if it will work with the brackets in your current grill: (while looking at your grill from the front with lid open), the overall width is approx 15 7/8" side to side. Front to back measurements is approx 11 3/8". You should be able to use this with no mods to your tray brackets but some mods might be necessary? Please measure your grill to verify. You are purchasing ONLY the LOWER DRIP TRAY (1) only. Thanks for looking.

Price: 17.5 USD

Location: Salina, Kansas

End Time: 2024-02-04T21:47:22.000Z

Shipping Cost: 0 USD