AGA LBSX200 200mm Acetylene Gas Buoy Light - Beacon Works Brentford Eng. QTY 2

Description: AGA Gas Accumulator Co (UK) Ltd. Lighthouse Engineers Beacon Works Brentford, EnglandQTY 2 Fixture #1 Model: LBSX200 No. 210 Burner - Acetylene Model: KB 80 No. 993 - Unrestored original paint (exterior). Interior has a fresh coat high quality exterior grade paint. Unknown where its service history was commissioned too. - Body is all brass other areas are copper. - 200mm Fresnel lens has a 3 area that have chipped off. Cant be seen if rotated to rear side and is not that obvious once inside the fixture.- Size is: 34"H x 15" diameter ruffly with a 9" diameter approx mounting base with (4) tapped holes.- The burner is in near perfect condition (on Fixture #1). I don't believe it has been fired up. Estimated pallet crate size for shipping will be 48"L x 48"W x 40"H. Approx cost to ship from west coast to east coast is around $500 I will credit any overcharge on freight. Any photos that seem to be a bit yellowish in color is my fault. For whatever reason the camera adjusted the light and it came out looking like that. The glass is in no way yellow. Its very clean and clear and the chips talked about up above, should not be a concern. It only adds character to the history of this fixture and unless you really try hard to look for it, you don't notice it. --------------------------------------------------------------------------------------------------------------------------------------- Fixture #2: The second one (no photos shown). Is currently being cleaned but looks the same pretty much as this one except it does not have the 2 lifting rings on the top like this one does. It has the same model number (LBSX200) but its serial number is stamped as: 11 NLB (the NLB is printed as part of the tag and is not stamped, I have no idea what that means. Also the second light does not include a burner. The Fresnel lense included with the second fixture seems to be a newer 1-piece casted glass type and so it does not have the vertical copper / brass spacers clamping the glass rings together, it does have a ring on the top and bottom. Local pickup is available. Circa. 1930-1935 approx.

Price: 4200 USD

Location: Torrance, California

End Time: 2024-12-05T15:23:52.000Z

Shipping Cost: 500 USD