AUTOOL EVAP Smoke Machine Automotive Smoke Tester Fuel Pipe Leak Detector Tester

Description: AUTOOL SDT202 Car Smoke Leak Detector is a professional auto pipe leak detect tool. It will help us position cars motorcycles leakage on the pipe systems quickly and exactly, such as Intake System Test, Exhaust Systems Test, Crankcase system test，Car Sealing Test, Fuel Tank System Test, Turbo System Test，Various Pipe Fittings Test. Crankcase System Test: Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage. Intake System Test: Leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power. Car Sealing Test: Poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc. Fuel Tank System Test: When there are gaps in the fuel tank and piping caused by improper installation or insufficient sealing of the fuel tank cap, it can cause leaks in the fuel tank system. Turbo Test: The leakage of coolant would cause the engine to report high water temperature.Various Pipe Fittings Test: Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc. EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling. Exhaust System Test: Unpurified harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust. How to work: Open the engine cover, and hang the detector in the cover. Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple. Secure this side with proper taper stopple/pipe, and connect it with smoke output tube. Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. Turn on the power switch, and detector starts to work. In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. After leak detection, please connect well the wires and pipe. lease repair the leak part timely with specific tool. Cautions:1.When you use this detector the first time, please fill 10-20ml oil, not beyond this range.2.New oil can be filled with only when the smoke is light,and it can't be filled over 15ml every time.3.Before filling new oil, please pour out the remaining oil in the detector.4.Please replace the detector oil regularly. List of Accessories SDT202 Smoke Leak Detector Locator Standard Cone Adapter: φ30-85mm, used to seal the airintake ports & introduce smokeinto the exhaust system. Power Cord Clamp: The cable length is 1.5m with 10A rated current. used to connectthe device to the battery powersupply. Valve Core Wrench: The double heads measure φ4mm/6mm with an overall length of 122mm & used as a tool to removeand install the EVAP service portvalve core. Hook: Used for hanging products. EVAP Special Connector: φ12.7mm, connects to the car's EVAP access port. which then introduces smoke. Test Oil Refill Bottle: The capacity is 100ml & usedfor adding smoke test oil. Rubber Connector Parts: The bigger side is φ16/10mmand smaller one is φ4/3mm.used to conetct the hose mouth to a smaller interface. Universal Airbag Adapter: Its minimum is φ25mm & maximum expansion is φ110-mm,used to seal the air inlet. Smoke Hose: Length is 1.5m, oil-resistanthose with φ6x9mm taperedcouplings, for conducting air & smoke. Hard Rubber Hose Plug: Used for sealing the hose. (φ5/10mm, φ9/15mm, φ25/35mm, φ32/45mm, φ45/60mm, φ60/75mm. Specifications Main unit dimensions: 8.2x5.3x4.3inch Package weight: 8.8lb Package dimensions: 11.8x9.8x11.0inch Output pressure: 0-11PSI Output Flow: 10-20L/min Pneumatic Output: Built-in two compressors Power: DC 12V, vehicle battery Voltage: DC 12V(Supplied by Automotive Battery) Smoke Output Value: 0-6L/min Heating Material: Mineral Oil or Baby Oil. What's in the package? 1pc * AUTOOL SDT 202 Main Unit 1pc * Hook (with hand-tighten nuts) 1pc * Standard Rubber and Cone Connect 1sets * Hard Rubber Hose Plug 1pc * Universal Airbag Adapter 1pc * Power Cord Clamp 1pc * Valve Core Wrench 1pc * Test Oil Refill Bottle(oil not included) 1pc * EVAP Special Connector 1pc * Smoke Hose and User Manual

Price: 119 USD

Location: Bordentown, New Jersey

End Time: 2024-08-17T06:25:25.000Z

Shipping Cost: 0 USD