Description: Something your car wantsWe are #1 in letterings. Period. This is an aftermarket product and is not affiliated with or endorsed by Toyota in any way.Flat Raised Letters Our letters are made of high quality ABS plastic bonded on double sided foam tape for the perfect grip. Unlike vinyl sets, each our letter is separated for fast and easy installation. You just peel backing protective tape and stick them on. These are perfect addition to your car, easy to install, incredible resistant to severe weather, dirt and dust. We offer the fullest collection of letterings possible! Virtually any color and any style can be done. Located in Florida, we are operating our factory for over 15 years, that means experience, quality and speed. SIMPLE INSTALLATION It will take minutes and can be maintained without any technical skills.CAR WASH SAFE We've tested them for years against car washes, debris from road, dirt and grease.WEATHER SAFE Outstanding resistance to long-term exposure to sunlight and weathering. Will not crack or rust.WILL LAST FOR YEARS Authentic BDTrims product. Precisely laser cut for perfect fit and look. With 5 year warranty.Other colors available: Simply let us know your color of choice during checkout, or send us a message right after purchase. By default color indicated in the product name will be shipped. contact us if you need custom colorGlossy BlackGalaxy BlackMatte BlackChromeGoldWhiteBlueRedYellowOrangeCarbon FiberRed CarbonYellow CarbonSilver/AluminumDesert StormEasy to installStep 1Step 2 Without removing the red backing protective tape "dry-fit" ALL pieces, noting correct placement, joins and angles. Very Important Note: ALL pieces should be checked "dry-fit" before proceeding. Thoroughly clean the area where the pieces are to be applied with an rubbing alcohol to remove ALL residue and dirt. Let it dry.Step 3Step 4 Remove red tape from the back and apply pieces. It is not recommended to install letters when it's cold, let pieces be at least room temperature. Remove white and/or clear protective tape from each letter. Enjoy!FREE ShippingReturns Order placed before 2pm EST usually ships the same day USPS Ground Advantage 3-7 days delivery in continental USA If you have delivery problems, contact us and we will definitely fix it.If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you received it.Any product you return must be in the same condition you received it and in the original packaging. Legal Disclaimer: Any names, symbols or descriptions used in our images and text are property of Toyota Motor Corporation, Ford Motor Company, General Motors, Nissan Motor Company or any other vehicle manufacturer, distributor or any affiliated companies thereof, and are used for identification and informational compatibility purposes only. It is neither inferred nor implied that any item sold by BDTrims is a product authorized by or in any way connected with Toyota Motor Corporation, Ford Motor Company, General Motors, Nissan Motor Company or any other vehicle manufacturer, distributor or any affiliated companies thereof.Product Description: This set is one of the most convenient type of adding nice touch to the empty embossed letters your car came with from factory. Do not hassle yourself with vinyl letters, ours are not paper thin, they are made of 0.15-0.20 gauge ABS plastic bonded with Acrylic Foam tape, covered with protective linings on both sides. Made in USA by using laser technology so they are precisely cut for superior fitting. Material is always flexible, doesn't consolidate, so will never crack or rip and of course never rust. Installation takes only minutes and can be done without technical skills. Please contact us if you need any other color Installation Instructions: Step 1: Thoroughly clean the area where the pieces are to be applied with an rubbing alcohol to remove ALL residue and dirt. Let it dry. Step 2: Without removing the red backing protective tape "dry-fit" ALL pieces, noting correct placement, joins and angles. Very Important Note: ALL pieces should be checked "dry-fit" before proceeding to Step 3. Immediately stop installation procedure and contact us even if one piece doesn't fit. Step 3: Remove red tape from the back and apply pieces. It is not recommended to install letters when it's cold, let pieces be at least room temperature. ATTENTION! SURFACE OF EACH LETTER IS COVERED WITH WHITE PAPER PROTECTIVE TAPE. IT SHOULD BE GENTLY REMOVED AFTER INSTALLATION. RED SIDE IS THE ADHESIVE SIDE (IT IS SOFT TO TOUCH SO YOU DON'T MAKE A MISTAKE). We are #1 in letterings. Period.Flat Raised Letters Our letters are made of high quality ABS plastic bonded on double sided foam tape for the perfect grip. Unlike vinyl sets, each our letter is separated for fast and easy installation. You just peel backing protective tape and stick them on. These are perfect addition to your car, easy to install, incredible resistant to severe weather, dirt and dust. We offer the fullest collection of letterings possible! Virtually any color and any style can be done. Located in Florida, we are operating our factory for over 15 years, that means experience, quality and speed. Other colors available: Simply let us know your color of choice during checkout, or send us a message right after purchase. By default color indicated in the product name will be shipped. contact us if you need custom colorGlossy BlackGalaxy BlackReturnsMatte BlackChromeSilver/AluminumRedYellowOrangeBlueWhiteGoldCarbon FiberYellow CarbonRed CarbonDesert StormEasy to installStep 1 Without removing the red backing protective tape "dry-fit" ALL pieces, noting correct placement, joins and angles. Very Important Note: ALL pieces should be checked "dry-fit" before proceeding.Step 2 Thoroughly clean the area where the pieces are to be applied with an rubbing alcohol to remove ALL residue and dirt. Let it dry.Step 3 Remove red tape from the back and apply pieces. It is not recommended to install letters when it's cold, let pieces be at least room temperature.Step 4 Remove white and/or clear protective tape from each letter. Enjoy! Legal Disclaimer: Any names, symbols or descriptions used in our images and text are property of Toyota Motor Corporation, Ford Motor Company, General Motors, Nissan Motor Company or any other vehicle manufacturer, distributor or any affiliated companies thereof, and are used for identification and informational compatibility purposes only. It is neither inferred nor implied that any item sold by BDTrims is a product authorized by or in any way connected with Toyota Motor Corporation, Ford Motor Company, General Motors, Nissan Motor Company or any other vehicle manufacturer, distributor or any affiliated companies thereof. Product Description: This set is one of the most convenient type of adding nice touch to the empty embossed letters your car came with from factory. Do not hassle yourself with vinyl letters, ours are not paper thin, they are made of 0.15-0.20 gauge ABS plastic bonded with Acrylic Foam tape, covered with protective linings on both sides. Made in USA by using laser technology so they are precisely cut for superior fitting. Material is always flexible, doesn't consolidate, so will never crack or rip and of course never rust. Installation takes only minutes and can be done without technical skills. Please contact us if you need any other color Installation Instructions: Step 1: Thoroughly clean the area where the pieces are to be applied with an rubbing alcohol to remove ALL residue and dirt. Let it dry. Step 2: Without removing the red backing protective tape "dry-fit" ALL pieces, noting correct placement, joins and angles. Very Important Note: ALL pieces should be checked "dry-fit" before proceeding to Step 3. Immediately stop installation procedure and contact us even if one piece doesn't fit. Step 3: Remove red tape from the back and apply pieces. It is not recommended to install letters when it's cold, let pieces be at least room temperature. ATTENTION! SURFACE OF EACH LETTER IS COVERED WITH WHITE PAPER PROTECTIVE TAPE. IT SHOULD BE GENTLY REMOVED AFTER INSTALLATION. RED SIDE IS THE ADHESIVE SIDE (IT IS SOFT TO TOUCH SO YOU DON'T MAKE A MISTAKE).
Price: 29.95 USD
Location: Bradenton, Florida
End Time: 2024-12-27T20:08:47.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: BDTrims
Type: Tailgate
Manufacturer Warranty: 5 Year
Color: Blue
Manufacturer Part Number: TAC-BLUE
Attachment Type: Self-Adhesive
Features: Easy Installation, Heat Resistant, No Drilling Required, Self-Adhesive, Waterproof
Material: ABS Plastic
Country/Region of Manufacture: United States
Finish: Matte
Placement on Vehicle: Rear
