DC Battery Monitor Meter 100A 0-200V LCD Display Amp for Car RV Solar

Description: 100A Product Features: 9-IN-1 Multifunction Meter - Display 9 types of measurement parameters at the same time, including Battery Voltage(0-200V), Discharge Current(0-100A), Discharge Power(0-20000W), Discharge Impedance( 0-1000Ω), Internal Resistance(0-999mΩ), Capacity(0-1000Ah), SOC, Energy(0-9999kWh), Running Time(0-999h). 360° Clear Visual Readings - LCD digital screen with blue led backlight, you can easily see all readings at any angles, freely check up your datas whenever at day or night! High Precision Monitor - Built in High precision chips, with only 1% deviation of the measurement accuracy, the meter shows you a stable real-time datas for your wiring devices. Easy Setup - Screws-Free design, with snap-fit tabs on the frame for mounting in a panel or case, while the clear hookup diagrams printed on the back, helps a lot for quick installation. Wide Application - Rated at 0-200v, with 100Amp current shunt, wide suitable for all vehicles, car, pickup, truck, SUV/UTV/ATV, boat, RV, solar panels, etc. Specification: Power: Measuring range: 0-20000W Voltage: Measuring range: 0-200V Current: Measuring range: 0-100A Impedance: Measuring range: 0-1000Ω Internal resistance: Measuring range: 0-999mΩ Capacity: Measuring range: 0-1000AH Measurement accuracy: 1% SOC: Dump energy is display via the battery symbol, totally 10 grids, every grid present 10% energy. Energy consumption: Measuring range: 0-9999kWh (Note: 1Wh=0.001kWh=0.001 Kilowatt) Running time: Measuring range: 0-999 hours (without load the time will not accumulate) Warm Tips: - If you run all negative current for all batteries through one shunt of the meter, then it would read for those batteries, pls making sure use within 100A. - If you want to know how long your batteries will last under the current load, please calculate by the formula, Amp Hours of the Battery ÷ Current Draw=Time. NOTES: 1. If test voltage is lower than 8V, please use the independent power supply mode, refers to the instructions. 2. Wiring order cannot be wrong. (For indoor use ONLY.) 3. The loads should not be exceed the rated power or current. 4. Use a needle tool to press the function button to prevent accidental touch. 5. The current is set according to the specification of the shunt. 100A with USB Features:【Multi-function】-Can monitor multiple electrical parameters at the same time, including voltage (8-120V), current (0-100A), power (0-12000W), impedance (0-1000Ω)), capacity (0-1000AH) , SOC, energy consumption (0-9999kWh) and running time (0-999h).【LCD Display】-Full viewing angle high-definition LCD display, digital display, easy to view, backlight can be manually controlled on/off, clearly visible no matter day or night.【USB Connection】--Newly revised and upgraded, the shunt adopts USB connection, which is simple and convenient. Say goodbye to messy wiring and avoid incorrect wiring.【Safe and Accurate】--The use of flame-retardant material shell improves the safety of use. High-precision chip control, efficient and stable operation, and accurate measurement.【Wide Application】-Battery monitor tester is widely used in automobiles, RVs, solar power systems, industrial assembly lines, trailers, boats, etc.Description:This DC multifunction meter is mainly used to test all kinds of battery’s voltage, current, discharge power, discharge impedance, capacity, SOC, energy, running time, and display the measurement datas with a large LCD screen. Comes with 100A USB Shunt and 1M length dual USB cable, make the wiring much more easier.Notes:1. This module is suitable for indoor, please do not use it outdoor.2. Applied load should not exceed the rated voltage and current.3. Wiring should be correct.Package included:1 x DC Battery Monitor Meter1 x 100A USB Shunt1 x Dual USB Cable Length 1M1 x User Manual

Price: 18.9 USD

Location: Perth Amboy, New Jersey

End Time: 2024-12-30T17:00:53.000Z

Shipping Cost: 0 USD