Epiphone Guitar pickup humbucker bridge 4C wiring harness push-pull single cut

Description: Compatible with electric guitars, Suitable for all humbucker Pickup Electric Guitar use Magnet: Ceramics humbucker pickup, 6 non-adjustable pole pieces and 6 adjustable screw pole pieces. Resistance: neck pickup is 7-8K / hole pitch 50mm and bridge pickup is 14-15K / hole pitch 52mm The single cut function is turned on. The resistance of the Neck is 3.5K- 4K, and the resistance of the bridge is 7.5K-8K. Completely wax-sealed and sealed to eliminate any unwanted feedback and noise. Comes with screws and springs, easy to install. Wiring Harness : 1 Toggle conversion + 4 Pots + 1 output (not including plastic transparent board) 4 pieces of ALPHA potentiometer (2 pieces of B500K Single cut function 2 pieces of A500K) We provide a complete set of pickups and Wiring Harness, which is a perfect match Easy to install. When you receive the product, you don't need to do soldering. You can use it by inserting the 5P end. You can use the B500K volume knob to cut Humbucker Pickups. The output wire of Humbucker Pickups is inserted into the 5P terminal (14.5mm). If the guitar body threading hole is smaller than 14.5mm, it needs to be enlarged to be able to pass through. Please confirm this important information before purchasing description This product is a professional and practical Humbucker pickup set, which is very suitable for the bridge and neck position, and is compatible with Gibson / Epiphone Les Paul guitars. These superb quality pickups are designed to replicate the classic warm sound, but their output is slightly higher, making your shots tighter. Very suitable for DIY enthusiasts and replacement of damaged, dirty or old Humbucker pickups!

Price: 43.13 USD

Location: 中国

End Time: 2024-08-30T08:39:09.000Z

Shipping Cost: 0 USD