HappyModel BNF Mobula7 1S 75mm Brushless Whoop BNF (ELRS / D8, D16 / AFHDS-2A Re

Description: HappyModel BNF Mobula7 1S 75mm Brushless Whoop BNF (ELRS / D8, D16 / AFHDS-2A Receiver) Bind-N-Fly We’re glad to launch our new Mobula7 drone, this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1s Will be the best choice in the whoop season. The world's first 5-IN-1 AIO flight controller with ExpressLRS 2.0, OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC, and Betaflight OSD coming out recently. This is an amazing flight controller for Brushless Whoop. You could get unbelievable RX and VTX ranges by using this flight controller. The new RS0802 motors come with a new unibell design, use a 1.5mm shaft, and include PCB bottom plate, high efficiency, and much more reliable. New onboard OpenVTX, max power up to 400mw, provides RCE and PIT mode, it was very useful for a race event. Features: X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and Openvtx VTX Power up to 400mw ELRS V2.0 Support NEW RS0802 KV20000 motors Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera Smooth and powerful Compatible for 1S Lipo/LIHV Recommend 1S 450mah/550mah/650mah battery(Not include) Specifications: Brand Name: Happymodel Item Name: Mobula7 1S 75mm Micro FPV whoop drone Wheelbase: 75mm Size: 99mm*99mm*40mm Weight: 24g Motors Specifications: Mode: RS0802 KV20000 Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm Weight(g):2.0g No.of Cells(Lipo):1S only Propellers Specifications: Weight:0.24g Material:PC Pitch:1 inchProps Dia:40mm Center Thickness:5mm Center Hole Dia:1.5mm Flight Controller Specifications: X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 PNP V1.0 flight controller with external TBS CRSF Nano receiver Target: CRAZYBEEF4DX X12 PNP V1.0 flight controller without onboard receiver Target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU6000 or ICM20689 or BMI270(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16 Built-in voltage detection Built-in current sensor Onboard 4-in-1 ESC Specifications: Power supply: 1S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware Onboard SPI ExpressLRS 2.4GHz Receiver Specifications: Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn’t flash separately ExpressLRS firmware Onboard Frsky SPI D8/D16 receiver Version Specifications: SPI BUS receiver Frsky D8 compatible Compatible Non-EU transmitter D8 model Channels: 8ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support Onboard 5.8g OPENVTX Specifications: Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v):650ma~1000ma Runcam Nano 3 Specifications: Model: Nano 3 Image Sensor: 1/3″ CMOS Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 150° Signal System: NTSC S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power: DC 3-5.5V Current: 110mA@5V 120mA@3.3V Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm Package Contents: Mobula7 1S 75mm Whoop Drone RTF (ELRS / FRSKY / FLYSKY) 1x 1S parallel charging board 1x Propeller removal tool 1x Extra camera canopy HappyModel BNF Mobula7 1S 75mm Brushless Whoop BNF (ELRS / D8, D16 / AFHDS-2A Receiver) Bind-N-Fly We’re glad to launch our new Mobula7 drone, this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1s Will be the best choice in the whoop season. The world's first 5-IN-1 AIO flight controller with ExpressLRS 2.0, OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC, and Betaflight OSD coming out recently. This is an amazing flight controller for Brushless Whoop. You could get unbelievable RX and VTX ranges by using this flight controller. The new RS0802 motors come with a new unibell design, use a 1.5mm shaft, and include PCB bottom plate, high efficiency, and much more reliable. New onboard OpenVTX, max power up to 400mw, provides RCE and PIT mode, it was very useful for a race event. Features: X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and Openvtx VTX Power up to 400mw ELRS V2.0 Support NEW RS0802 KV20000 motors Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera Smooth and powerful Compatible for 1S Lipo/LIHV Recommend 1S 450mah/550mah/650mah battery(Not include) Specifications: Brand Name: Happymodel Item Name: Mobula7 1S 75mm Micro FPV whoop drone Wheelbase: 75mm Size: 99mm*99mm*40mm Weight: 24g Motors Specifications: Mode: RS0802 KV20000 Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm Weight(g):2.0g No.of Cells(Lipo):1S only Propellers Specifications: Weight:0.24g Material:PC Pitch:1 inchProps Dia:40mm Center Thickness:5mm Center Hole Dia:1.5mm Flight Controller Specifications: X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 PNP V1.0 flight controller with external TBS CRSF Nano receiver Target: CRAZYBEEF4DX X12 PNP V1.0 flight controller without onboard receiver Target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU6000 or ICM20689 or BMI270(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16 Built-in voltage detection Built-in current sensor Onboard 4-in-1 ESC Specifications: Power supply: 1S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware Onboard SPI ExpressLRS 2.4GHz Receiver Specifications: Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn’t flash separately ExpressLRS firmware Onboard Frsky SPI D8/D16 receiver Version Specifications: SPI BUS receiver Frsky D8 compatible Compatible Non-EU transmitter D8 model Channels: 8ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support Onboard 5.8g OPENVTX Specifications: Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v):650ma~1000ma Runcam Nano 3 Specifications: Model: Nano 3 Image Sensor: 1/3″ CMOS Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 150° Signal System: NTSC S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power: DC 3-5.5V Current: 110mA@5V 120mA@3.3V Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm Package Contents: Mobula7 1S 75mm Whoop Drone RTF (ELRS / FRSKY / FLYSKY) 1x 1S parallel charging board 1x Propeller removal tool 1x Extra camera canopy × × × × × × × Tell a friend Visit store Watch now Postage info USPS First Class - USPS Priority Mail Flat Rate Envelope - $7.99 FedEx Standard Overnight - $29.99 Click the Postage tab above the listing description for more info Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like 2212 1000KV 2-3S Brushless Motor EMAX XA2212 2212 Brushless Motor 2-3S (820KV / 980KV / 1400KV) 5.8GHz FPV Kit System Diversity DVR Monitor 1200TVL Camera 800mW Video Transmitt APM 2.8 Flight Controller w/ Compass for FPV RC Drone Aircraft Ardupilot Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © SpeedyFPV Postage Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal Returns Returns are accepted Items must be returned within 30 days of the auction ending Seller will pay for return shipping. eBay integration by

Price: 129.99 USD

Location: College Station, Texas

End Time: 2024-11-10T03:14:23.000Z

Shipping Cost: 10.45 USD