Honda TRX450R Upper Shock Mount Widening Kit

Description: Extended brake lines we recommend using with this kit: https://www.ebay.com/itm/184765704307 This is a Widening Kit for the FRONT of your ATV, Widen the REAR of your ATV also with our Wheel Spacers: https://www.ebay.com/itm/183818839938 CLICK HERE TO GO TO OUR eBay store: http://stores.ebay.com/Diamond-J-Customs_W0QQsspagenameZMEQ3aFQ3aSTQQtZkm PATENT PENDING The same kit will fit either a 400ex or a 450r. Two special items to note on the 450r is that you will need to make small notches in the underside of the fenders to allow the shock brackets to protrude outward from the stock mounts, and the headlight may be very difficult to reinstall the factory headlight with the upper shock mount in place. This kit includes only the upper shock widening components. Possible uses of this kit include: 1. Combine with longer a-arms to use stock shocks with custom a-arms if the a-arms usually require longer shocks. 2. If you previously purchased our widening & lowering kit, and now would like to have the shock components to widen the shocks to match the a-arm spacing. Diamond J Customs' a-arm and shock widening kits are a unique approach to increasing the width of an ATV. Instead of replacing the a-arms with custom built, expensive after-market a-arms, this kit simply relocates where the a-arms and shocks mount to the frame. The precision laser-cut brackets supplied in the kit bolt to the stock mounts on the frame, and provide two sets of new mount locations for the a-arms and shocks that are 2 ¼ or 3 inches outward on each side. This provides a 4 ½ or 6 inch total increase in the width of the ATV while making use of all of the stock suspension components. Threaded extensions are also supplied to extend the steering tie rods to match the widening kit. Some of the widening kits also include shock mount kits that are adjustable to allow the customer to vary the ride height of the ATV, utilize longer shocks, or both. There is also a universal shock conversion kit sold separately that bolts on to the rest of the kits to add some of the same adjustability. Kits come complete with all necessary hardware and tie rod extensions that thread onto your stock tie rods and secure in place with jam nuts. Please specify if you want the tie rod extensions for the +4.5" or +6.0" setting by letting us know at the time of ordering. If we don't hear from you within a couple days, we will assume you want the +6 kit. Shocks and a-arms are not included with any of the kits. The kits require no cutting or welding and can be installed easily in an afternoon by a typical home mechanic. Brake lines are typically long enough for the conversion if the intermediate support on the a-arms is disconnected to provide more slack in the lines. Rerouting the brake lines around frame members to give a more direct path to the hubs can also help. Longer brake lines are available on other websites if the customer prefers to also make that modification. The following ATV's will most likely need longer brake lines for the +6" setting: YFZ450, 450R and Z400. Some of the pictures show the ATV's with the front bumper removed so you can see the kit more easily. The bumper mounts are not affected by the kits. Stock and aftermarket bumpers should work fine with all kits. Steel brackets are made from 1/4" thick carbon steel and are designed to be used in all types of riding and racing, including motocross. Many customers are using these kits to race every weekend. The a-arm mounting brackets are designed to be as strong as the a-arms connecting to them. The eight separate brackets work together to share the load in all directions (such as rough terrain or hooking an occasional tree on the trails). These kits ARE designed (and used) for the harsh conditions of motocross racing. All kits come powder coated gloss black. Color choice is not available, but other colors can be painted or powder coated by the customer over the gloss black finish. Kit components go through a seven stage chemical dip cleaning process, electro-statically dipped in black primer, baked, then powder coated and baked again to a super high-strength gloss-black finish. Like most other EBay items, you are using this "as-is" kit at your own risk, with no warranty expressed or implied. By bidding, you are agreeing to these conditions. As you can see from our feedback, we can be very helpful if you have questions before or after your purchase, and we will do everything we can to make sure you are as thrilled with this conversion kit as we are. We are thrilled with the performance of this kit, and excited that so many others have enjoyed it as well. You won't be disappointed!!! As you can see from our feedback, these kits are for real, and we are very fair & honest people to work with!! Send us pictures of your ATV after you have installed it so we can include it on our website galleries. Shipping & handling (including other fees) is flat rate, and our products are all preboxed and ready to ship. Combined shipping is not usually possible. We also have awesome looking and very strong custom billet aluminum rear wheel spacers that will fit these ATV's and spread the rear 2 inches on each side. They are listed in our eBay store. The goal of Diamond J Customs is to develop and offer products that add performance to the ATV without the enormous price tag found on other ATV aftermarket products. We do this by designing kits that will allow use of as many stock components as possible, and allow you to mount higher performing parts from other ATV’s on your model. These parts are often available at reasonable prices on eBay, saving you money. We've sold literally hundreds of these kits to other “Quad Fanatics” and from the feedback from customers on eBay, you can see that they have been more than satisfied with the products. We work hard to design products that maximize the performance of your ATV while keeping prices as low as possible. Safety is not something that will be compromised. On Jan-05-09 at 04:31:29 PST, seller added the following information: Sellers: Delight buyers. Get your own map of past buyers.

Price: 119.99 USD

Location: Polk City, Iowa

End Time: 2024-10-28T18:01:16.000Z

Shipping Cost: 15 USD