Hydraulic 6 Port Solenoid Diverter Selector Valve 1/2"BSP 12 VDC 13gpm 50L DVS6

Description: WARNINGIf you buy more than one product in my shop, write to us and I will refund all shipping costsNOTE: We issue VAT invoices for countries in the European Union.Only accredited courier companies GLS, Fedex, DPD, UPS are delivered to EU countries. Delivery takes 2 to 4 days.We sell wholesale Hydraulic valve 6/2 way valve - changeover valve 12 volt 50 l / minDistributor (solenoid valve) 6/2 12VApplication: It is widely used in hydraulic systems in the agricultural, gardening, forestry, construction and industry in the broadest sense. The divider is adapted to different types of machines, such as. B. agricultural machines, tractors, sprayers, tours, cyclopes, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Technical specifications Electrical plug included. Recommended system oil flow: 0 - 50 l / min. Control examples: Two independently working two-way cylinders that are controlled from one section in a hydraulic distributorWorking principle: The solenoid valve enables switching between two independent double-acting cylinders by means of an electrical pulse (24 V). It is an ideal solution if we have a hydraulic distributor that already uses all available sections and suddenly a new, additional cylinder has to be controlled. In the TUR loader, this device enables control of a section in the distributor, bales and bale grabs or crocodiles. Switching between the controls is done with a button. It can be mounted near the distributor or directly on the control element, e.g. B. on a lever or joystick. The solenoid valve enables the control of two servomotors, but does not permit the simultaneous control of these servomotors. Work should be done on the first cylinder, then switch to control the second cylinder.Control: Two-position slide (1 - 2), spring-loaded, d. H. It returns to neutral after the power is turned off. While the slide is in the neutral position (1), it is possible to change the actuator no. 1. Principle of pusher operation: Position 1 neutral (power supply to the coil is interrupted) Possibility to control actuator no. 1.2 Working position (power supply to the coil) Possibility to control servo motor No. 2.Electricity: DC power supply 12V Connection: Supply from the distributor section (P1, P2): BSP 1/2 '' internal thread Output to actuator no.1 (A, B): BSP 1/2 '' internal thread Output to actuator no.2 (C, D): BSP 1/2 '' internal thread Pressure range: Maximum pressure: 210 bar Recommended oil temperature range: Permissible ambient temperature: -40 ° C to +60 ° C. Permissible oil temperature: -15 ° C to +80 ° C. Recommended oil filtration at 10 - 15 µ Possibility to connect distributors

Price: 68 USD

Location: Torun

End Time: 2024-08-02T16:06:39.000Z

Shipping Cost: 65 USD