Description: Low Profile Bracket - RTX A2000 - 3D Printed ASA FilamentFeatures and further detailsDetails: This is a custom made Low Profile Bracket based on the original RTX A2000 Low Profile Bracket. I made 2 variations with an open and a grid design. The open design can improve air flow for the card, in theory making the card run cooler. The grid design is a 1 for 1 design copy of the original bracket. I test the warp temp of the bracket and I tested to 65-70C and no warpage was noticed. The glass transition temperature of the ASA is 95C so it should work great.Setup: First remove the full size bracket with 2 screws on the front and 2 on the side. These are two different hex screw sizes. Remove the bracket and put back the side screws. My bracket doesn't use the side screws as it didn't work with the 3D printed bracket. Place the small gasket on the card and next place the main bracket on top. The gasket fills in the gaps. Carefully tighten the main screws. Make sure everything lines up correctly before fully tightening. And you should be good to go.Package Includes: The bracket of your choice and the gasket. Also comes with a manual for installation. If you have any questions be sure to ask. THIS IS 3D PRINTED. NO GPU IS INCUDED. ONLY THE BRACKETS ARE INCLUDED.
Price: 10.5 USD
Location: Lititz, Pennsylvania
End Time: 2024-11-18T20:31:28.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: NVIDIA
Chipset Manufacturer: NVIDIA
Chipset/GPU Model: RTX A2000
Available Variations
Color: Open Low Profile
Price: 10.5 USD
Available Quantity: 41
Quantity Sold: 36
Color: Grid Low Profile
Price: 10.5 USD
Available Quantity: 52
Quantity Sold: 47