MF-110A Pocket Mini Multimeter Analog AC/DC Voltmeter Ammeter Ohmmeter Tester US

Description: DescriptionItem Description:DC Voltage: 10V / 50V / 250V / 1000VDisplay Type: Pointer DisplayStyle: Pointer-typeOperating Mode: HandheldDC Current: 0.5mA / 50mA / 500mAAC Voltage: 10V / 50V / 250V / 1000VMaterial: ABSProduct Name: Analog Pointer Multimeters Testing InstrumentFeatures: - The regulation is simple and convenient, the workmanship is exquisite, and the measurement is accurate.- The scale is accurate, the dial is clear, the gear is accurate, and the sense of pause between gears is strong.- Pocket multimeter, with multiple measurement functions, full range protection and high safety performance.- The test pen is made of wire, which is not easy to break and can be used for a long time.- Suitable for machine maintenance, communication, power, circuit equipment maintenance, colleges and universities student experiment, etc.- Especially suitable for e-learning classes, amateur radio experiment of primary school students.- Made of engineering plastics, is light in whole, small in size and convenient to carry.- Multiple protection. Adopt overvoltage, overcurrent Self Fusing protection circuit, meter overload protection, etc.Product Model: MF-110ARange Display: Mechanical Pointer NeedlePerformance Mode: Manual RangeProtective Design: Insulating MaterialPower Supply: 1 x AA Battery(Not Included)Points for Attention1.Before measurement, check whether the position of the range selection knob is correct.2.If the current or voltage to be measured is unknown, set the measuring range to the highest gear, and conduct the measurement after correct measurement and selection.3.The maximum DC current range is 250(500)mA, and the maximum voltage range is 500(1000)V.Measurement Steps1.First check whether the pointer is on the zero indexing line, otherwise turn the zero adjuster for adjustment.2.DC Current (DCA)(1)Insert the red plug of the test rod into the instrument "+" and the black plug into the instrument "-".(2)Set the measuring range to the highest gear of the current measuring range.(3)Contact the probe of the test rod with the circuit to be tested and connect it in series with the circuit to be tested.(4)Read the indicated value from the second scale (mAV) of the dial.(5)If the reading on the scale is too small, turn down 1 gear until the best indication is obtained.3.DC / AC Voltage (DCV, ACV)(1)Set the range selection to the maximum limit of voltage.(2)Connect the probe of the test rod across the circuit under test (in parallel).(3)Read the indicated value from the second scale. Note that the 10V gear reads the indicated value from the third scale (special for AC 10V).(4)If the reading on the scale is too small, turn down 1 gear until the best indication is obtained.4.Resistance (OHM)(1)Set the measuring range to the corresponding gear.(2)Short circuit the probe of the test rod and adjust the adjustment knob to stop the pointer on the zero ohm dividing line. If the pointer cannot be adjusted to the zero ohm dividing line, the battery is exhausted and needs to be replaced.(3)Read the resistance value from the first scale (OHM) during measurement.(4)Use the test rod probe to measure the resistance of the device under test, which shall be connected in series with the device under test.(5)Note: If the resistance of the circuit is measured, cut off the power supply of the circuit and discharge all capacitors.Place of Application: Battery / Resistance / DC Current Test, Machine Maintenance / Communication / Power / Circuit Equipment MaintenanceNote: The multimeter is a normal product, only for simple measurements.Package Including:Package Including: 1 x MF-110A AC/DC Analog Multimeter((Not Included Battery)2 x Test Pen Product Weight: 80 G / 2.82 OuncesProduct Dimensions (L*W*H): 95*75*25 MM / 3.74*2.95*0.98 InchesPackage Weight: 83.0 G / 2.93 OuncesPackage Dimensions (L*W*H): 100*80*27 MM / 3.94*3.15*1.06 InchesRetail Packaging: No, No Packing Attention1.Payments are expected within 7 days after the auction ends. Otherwise unpaid item complaints will be filed by eBay for not receiving payment.2.When put the order in the awaiting payment,Payment must be paied within 20days.3.Shipping and Handling will depends on country location, item weight and attribute.Shipping Details1. Item will be shipped within 48 hours after payment received, excluding weekends and holidays.2. We only ship to eBay confirmed address. 3. We ship worldwide via Regular Airmail. Normally the shipment to worldwide takes 10 to 35 business days, excluding weekends and holidays.4. Shipping are not available for PO BOX, Parcel locker, Parcel collect Retrun 1. Please contact us to request a return and provide your purchasing information that had been sent at the time of purchase 2. Returns must be made within 30 days from the date of purchase.

Price: 8.75 USD

Location: Monroe Township, New Jersey

End Time: 2024-08-14T03:02:55.000Z

Shipping Cost: 0 USD