Portable Hand Held Electric Pipe Threader Electric Tapping Machine Pipe Cutter

Description: Welcome to llppwe❤, have a good day!!!2300W 50HZ 25 r / min Electric tapping machine Pipe cutter 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 inch Item condition: New: newer, unused Threading range: 20.9 - 49.6mm 1/2 - 2 " Material: all copper wire machine Energy type: alternating current Nominal power: 2300 (W) Voltage: 110V Weight: approx. 17.3 kg Product dimensions: 57 x 14 x 31 cm Nominal spindle speed: 25 (r / min) Size: 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inches) Pipe outside diameter: 22,27,34,42,48,60mm Inner pipe diameter: 15, 20, 25, 32, 40, 50 mm Scope of application: Suitable for tapping galvanized pipes, iron pipes, PP pipes and pipes Installation Instructions: Not included Product function description: Operator guidance: 1. Select the corresponding die head. The sheet is installed from the right on the host. 2. Clamps, clamps the pipe approximately the same length as the arm (L2 is approximately equal to L1). 3. Rotate the front and rear switches to the down arrow position to start the switch and auxiliary contacts. 4. With hard pipes such as stainless steel pipes, galvanized pipes, brass when refueling in good time, plastic pipes without fuel. 5. Note that the tube holder cannot be touched with the host during the right shift, otherwise it will injure the host. 6. After the machine stops, pull the reverse switch up and exit the pipe. 7. This product supports the use of standard pipes. Description: This is our brand new electric tube threading machine, which is widely used in plant installation and construction industry. It is suitable for threading various water, electrical or gas pipes from 20.9 mm to 49.6 mm. With its powerful motor, this threader is an ideal device for increasing work efficiency, shortening construction time, ensuring construction quality and reducing labor intensity. This product is suitable for industrial and mining companies, institutions, family maintenance. Characteristics: * 100% new and high quality * Adopt of high-quality die head, long life, thread clear * Ease of use, convenient to carry and durable * Lightweight and compact hand design, save labor * Apply to the thread work of galvanized pipe and iron pipe * Powerful motor, increase work efficiency, shorten the construction time * Includes 6 screw nozzle heads: 1/2 ", 3/4", 1 ", 1-1 / 4", 1-1 / 2 "& 2" * Note: Keep adding the lubricating oil as you use it Package list: 1 x pipe thread 1 x pipe clamp 1 x fixed rod 2 x carbon brush 1 x oil can 6 times dies 1 x storage box Operation note: 1. Do not directly change the direction of the machine during rotation 2. Lubricating oil should be added during use 3. The pipe must be fixed firmly and cannot rotate with the machine 4. If there is abnormal heating or smoke, power off in time and continue to use after cooling. PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.PlatformSKUBI-YC5574-130* Feature *high-performance,good stability,Easy OperationBrandUnbrandedMPNDoes Not ApplyInsert electricity20 ,9 -49,6mm 1/2 -2"Tool TypePipe Threading MachineIncluded AttachmentsPipe DieMaterialWhole copper wirepower2300wVoltage110VProduct dimensions57 x 14 x 31 cmNominal spindle speed25 (r / min)Size1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inches)Thread StandardN/AOn Sep 9, 2024 at 23:44:31 PDT, seller added the following information:

Price: 202.03 USD

Location: La Puente, California

End Time: 2024-10-10T05:06:58.000Z

Shipping Cost: 0 USD