Puerto Rico Flag Vinyl Decal, Bumper Sticker, Truck, Car, Windows, Outdoors, etc

Description: DESCRIPTION(Please read the entire auction)Puerto Rico Flag vinyl decal. Decals are high quality Oracal 651 vinyl with an minimum outdoor life of 6+ years. Decal should stick to any hard smooth surface. Whatever color you choose, will be your decal color. There is no background on these decals. Whatever color of surface you apply it to will be the background color. These decals are not cheap printed stickers, they are single color vinyl decals!There will be opaque (application) transfer tape preinstalled. Standard decal colors are gloss black and gloss white. Feel free to contact me for other colors and sizes. If you select "other", please leave a note of your desired color!Exact overall sizes are provided, sizes are of max height and max width. All sizes are in inches. Please make sure your familiar with this measurement so you order the correct size for your application if multiple sizes are offered. If a promotion is running, please add the required decals to cart and eBay will automatically adjust the price! Check out the installation notes below for application and additional details about your decal. Thank you for looking! Click here to check out my eBay Store! SHIPPINGTracking Included! Installation Notes: Vinyl Decal installation notes:Your vinyl decal is of high quality extreme conditions Oracal 651 which has an outdoor life of a minimum of 6 years. The recommended temperature to install your decal is between 46 and 90 degrees Fahrenheit. Avoid installing your decal to hot surfaces/in direct sun light. Oracal 651 is considered a permanent vinyl and should stick to any clean, smooth hard surface. ie: Windows, car, metal, etc...There are 2 methods to installing your decal: a dry and wet method. Dry Method installation: Tools needed: decal, squeegee or credit card, soap and water, alcohol, paper towel and tape measure or masking tape if needed for ease in alignment. Clean area you wish to apply your decal with soap and water, dry area and alcohol preferred decal location for a clean application area. Once dry, simply peal the application tape from the decal backing on an angle slowly. Note: if any part of the decal does not transfer to the application tape simply lay tape back down and place on a hard surface and burnish(rub) the decal with your squeegee or credit card and retry. Once decal is removed from backing carefully place your decal in the desired location. Note: pre plan ahead on angle and exact placement of decal as there are no adjustments using this method. Once it sticks that will be the location of the decal. After placing decal on you desired surface, burnish the transfer tape with your squeegee or credit card to apply and remove any air bubbles.Peel transfer tape back at an angle slowly to expose your new decal. If any part of the decal lifts up in this process, simply lay transfer paper back down and burnish again. Continue to remove until transfer paper is completely removed and your decal is attached to your application surface.Your are now finished and able to enjoy your new decal, wait about 2 days before washing your vehicle. If placed on an indoor surface like a glass bowl, hand wash only as needed. Wet Method installation: Tools needed: decal, squeegee or credit card, soap and water, spray bottle, alcohol, paper towel and tape measure or masking tape if needed for ease in alignment. Clean area you wish to apply your decal with soap and water, dry area and alcohol preferred decal location for a clean application area. Take spray bottle and fill with water and a couple drops of dish soap. Spray application site liberally and simply peal the application tape from the decal backing on an angle slowly. Note: if any part of the decal does not transfer to the application tape simply lay tape back down and place on a hard surface and burnish(rub) the decal with your squeegee or credit card and retry. Once decal is removed from backing spray your soap and water solution liberally on the sticky part of the decal. Decal can now be placed and be moved around until the desired location is reached. After placing decal, burnish the transfer tape with your squeegee or credit card to apply and remove all water and any air bubbles from under the decal.Peel transfer tape back at an angle slowly to expose your new decal. If any part of the decal lifts up in this process, simply lay transfer paper back down and burnish again. Continue to remove until transfer paper is completely removed and you decal is attached to your application surface.Your are now finished and able to enjoy your new decal, wait about 2 days before washing your vehicle. If placed on an indoor surface like a glass bowl, hand wash only as needed. FAQ: Question: Why shipping charges?Answer: We use to offer free shipping options but there is too many scammers saying they never received items, because of this, everything is paid shipping so there is a tracking number. This policy could change when eBay offers letter tracking in this category. Question: When do you give feedback?Answer: We provide feedback to everyone that leaves feedback, this lets us know you have received your order and is happy! My eBay Store!

Price: 2.19 USD

Location: Middle River, Maryland

End Time: 2024-03-07T22:46:06.000Z

Shipping Cost: 3.49 USD