Red House SEEKER J 5 LH MOD Vintage Natural Electric Bass Guitar

Description: Red House SEEKER J 5 LH MOD Vintage Natural Electric Bass GuitarDescriptionRed House's lefty 5-string bass, which boasts the highest quality domestic production, is now in stock.It is a JB type with a slightly smaller dinky shape, and the material is a large ash body with a heathered grain, a maple neck, and a maple fingerboard.The flame maple on the back of the head is Red House's original head vibration control structure.The electrical system has been modified and has been converted from active to passive.Controls are 1 volume, balancer, 1 tone and dummy switch pot. Only the Push/Pull switch is valid and turns the rear PU on/off.The pickup may have been replaced.It has been weather-checked overall, and there are some areas of paint loss, and it shows moderate signs of use. There are dents and scratches from the strings on the head.The neck is nearly straight and in good playing condition. *If the truss rod, remaining frets, and string height are listed, they were measured by our staff during setup, and may change due to environmental factors such as climate, humidity, etc.The numbers are intended to be used as a reference when purchasing, and we do not guarantee that the numbers will be the same when you receive the product. Product specificationsProduct rank: There are some scratches, but there are no problems for normal use. Country of manufacture: Japan. Genuine gig case. Weight: 4.10 kg. Truss rod [No problems] The rod has been checked up to 60 degrees left and right, and there are no problems. Frets remaining [No problems] Sufficient frets. Height String height: 2.5mm above the 12th fret on the bass string side 2.0mm above the 12th fret on the treble string side Nut width: 48.4mm Neck thickness near the 1st fret: 20.4mm Neck thickness near the 12th fret: 24.1mm Scale: 864mm 34"& #41; RADIUS305mm 12" String DAddario / .045-.135 set during setup Repair/maintenance area cleaning/string replacement/rod adjustment/octave adjustment/string height adjustment/grinding Payment You can choose from a variety of payment methods. For more information, please see the "Shipping and payments" tab for details. Shipping We usually ship within 5 business days of receiving cleared payment. The shipping is by FedEx, DHL or Japan Post (EMS). It takes 3-7 days (may take a few more days depending on the country) and is trackable. We will contact you if these shipments are not available. If these shipments are available but there are remote shipping charges in your area, we will contact you for additional shipping charges and we will ask you to pay. Notice Items on the list are second hand or vintage. There is the possibility of rust, fading, scratches, cracks, dents, etc. Please take a closer look at the pictures. Light scratches and small damage are hard to see with photographs. If you want to know the details before purchasing the item, please contact us. *International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as “gifts”. US and International government regulations prohibit such behavior. Provided by HARU eBay listing tool.Provided by HARU

Price: 2562.11 USD

Location: Chubu

End Time: 2024-12-04T09:26:40.000Z

Shipping Cost: 160 USD