Sunfish Sailboat Spars on Deck Cover - Sunbrella Pacific Blue

Description: Sunfish Sailboat - Spars on Deck Top Cover - Sunbrella Pacific BlueThis quality product is made in USA by SLO Sail and Canvas Product Information As shown in the picture, this Sunfish® cover is a cross between our top flat cover and our mast up cover. This cover has the tail on the cover to allow the spars and sail to be stored on deck. It will also be cut wider to make room for the spars on deck. This cover has a large reinforcement at the bow to handle the extra chafe caused by having the spars on deck. This is a great option if you would like to leave all of the equipment for your boat, at your boat, but with the mast down. Our Sunfish® cover fits snugly below the rub rail of the hull to seal out dirt and water. It features a Velcro attachment around the aft section of the boom (the part that hangs over the back of the boat). The cover is held on through most conditions by the elastic cord in the hem and there are tie down points every three feet around the cover if you need to tie it down. This sailboat cover is compatible with our Sunfish® hull cover if you want to completely enclose your boat. You can upgrade your cover to include straps or a bow eye cutout. The straps will be in place of the webbing loops and will go from one side of your cover to the other. This sailboat cover is compatible with our Sunfish hull cover if you want to completely enclose your boat. Made from genuine Sunbrella fabric. This fabric boasts a 10 year warranty against color fading and loss of strength in the sun. The fabric is waterproof, breathable, and resists mildew, U/V, and chafe. All of the sewing on our Sunbrella covers is done in Tenara thread for the ultimate UV resistance. Tenara thread has a 15 year warranty against UV degradation. For those not familiar with Tenara thread it is a Teflon product by the W.L. Gore company, the manufacturers of Gore-Tex. By using Sunbrella fabric and Tenara thread we are giving these covers a 10 year + life span.Material: Sunbrella - dyed BlueMarine grade cover fabricWaterproof, chafe and UV resistantSolution dyed woven acrylicSewn with Tenara PTFE thread10 Year limited warrantyExpected lifespan: 10+ years depending on climate, usage, and colorNot recommended for towing due to poor chafe resistance The measurements below correspond to the measurement diagram above for the Sunfish®: A (Length over all) = 165.5 inches B (Transom) = 24 inches C (Max Beam) = 48 inches D (Max Beam to Bow) = 77 inches If you are unsure if your sailboat is a Sunfish®, please check these measurements on your boat. There are many Sunfish® clones out there. We have separate listings for some of them - including the Phantom, Pointer 14, Scorpion, and the SeaGull. Related Products Sunfish® Recreational Line Kit Sunfish® Sailboat - Top Cover - Sunbrella Pacific Blue Sunfish® Sailboat - Mast Up Flat Cover - Sunbrella Pacific Blue About Us SLO Sail and Canvas is a small band of sailing enthusiasts. As a group we are dedicated to providing high-quality, hand-made products, built in our San Luis Obispo, California loft, with materials manufactured in the USA. We realize that great, American-made products must also be competitively priced. We don't think you can beat our quality or our price no matter where you shop (or cyber-shop). Whether you sail for pleasure or competition, we specialize in building new trampolines, sails, covers, and other accessories for your particular boat. Our seasoned staff has years of experience designing and building top-notch products. All trampolines, sails, and covers are first hand cut from a tried and true pattern, then assembled and sewn by our expert staff. Note: although we try to provide the most accurate representation possible some products may vary from pictures.

Price: 372.54 USD

Location: San Luis Obispo, California

End Time: 2024-03-13T22:40:36.000Z

Shipping Cost: N/A USD