Universal Fuel Pump Removal Tool, Adjustable Fuel Pump Lock Ring Tool, Fuel Tank

Description: Widely Fitment: This fuel pump removal tool Use for symmetrical holes type & 5 or 7 holes type fuel tank lid. (Check the type of the lock ring of your car before buy)Adjutable Size: This fuel tank lock ring tool has a large adjustment range (5.83~7.83inch) which is suitable for different oil pump lock rings.A MUST HAVE TOOL: This universal fuel pump removal tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings.Intended Use: This fuel pump ring removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. （use with a 1/2" drive ratchet or breaker bar）Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank. Product Description What does this tool do? Our Fuel Tank Lid Remover Tool easily removes and installs the lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. This tool will save you time and energy during the installation and removal of these lock rings! Can this fuel tank lid remover tool fit my car? Specially designed for removing the holes type fuel tank lid.  Use for symmetrical holes type & 5 or 7 holes type fuel tank lid. Use with 1/2 " DR. or 21mm wrench Applicable for Car models List: 98% application coverage for GM Vehicles, dating back to 1986 for Ford/Jeep For Audi A4 for 05-10 Chrysler 300 / dodge ram / Plymouth Models with metal fuel pump lock rings For Nissan For Dodge Charger 3.5L 2006-2010 For Chevy Silverado etc... Jaw adjustable range： 148~199mm.  If you are not sure, please tell us your car model and we will check for you. What other tools do I need to remove the fuel pump lock ring? This fuel tank lid remover works with both 1/2-inch drive ratchets and 1/2-inch drive breaker bars. Is this item of good quality? Very well made. Thick casting with strong locking tabs on the ends. Is it a must-have? Never try removing the lid without this tool. Sparks can cause an explosion if the seals are leaking. This tool fits tight and locks and unlocks using a large breaker bar or ratchet. So you may use it only once. But it's smarter to do so than bashing on the retainer ring and potentially destroying fuel pump components. Or the tank. The tank BTW is USD 1500. The pump USD 200. But this item. Sturdy, takes a 1/2-inch drive ratchet. Not Applicable for Car models List: Not Applicable for Polaris RZR Not Applicable for BMW 325i Not Applicable for bmw 335i fuel pump Not Applicable for mazda 6 Not Applicable for toyota tacoma Not Applicable for toyota tundra Not Applicable for toyota corolla Not Applicable for Hyundai A must have tool to change fuel pumps and/or sensor! This tool is a MUST if you want to open your fuel tank, fix faulty fuel sensors, Sending Unit, or a fuel sender/floater. When you start opening your fuel tank you will see why, for you need a lot of leverage and force to open pressurized tanks. This tool is ultra heavy duty. You can use a Break-Over Bar. Widely fit! Most of The Truck Fuel pump retaining Rings are the Same Size! So this fuel pump ring can work for many cars. But if your vehicle is not specifically listed in the tool description, please ask us if it will work. Make sure that you measure the diameter of the ring before buying this tool to make sure that it will fit. That said, this is a sturdy tool that will work for the right size ring. Save yourself time and money! Use this and a breaker bar and have covers off in minutes. Most mechanics do not have this tool...only the Dealership and they charge quite a bit more than any Auto Repair Shop.

Price: 24.94 USD

Location: Denver, Colorado

End Time: 2025-01-22T06:27:16.000Z

Shipping Cost: 0 USD