Waveshare BG95 EVB Development Board Designed For QuecPython Low Power GNSS

Description: DESCRIPTION BG95 EVB Development Board Designed For QuecPython, Low Power Consumption, Supports LTE / EGPRS Communication And GNSS PositioningBG95 EVB Development BoardCompact & Portable Development Board Designed for QuecPythonSupports LTE Cat M1 / LTE Cat NB2 / EGPRS Communication, GNSS PositioningFeatures At A GlanceThe BG95-M3 Zero development board is equipped with BG95-M3 module, which is a multi-mode LPWA module supporting LTE Cat M1 / LTE Cat NB2 / EGPRS. It is 3GPP Rel-14 compliant and offers maximum data rate of 588 kbps downlink and 1119 kbps uplink under LTE Cat M1. Features ultra-low power consumption with built-in MCP as well as the ARMCortex A7 processor supporting ThreadX.Equipped with BG95-M3 main module, supports LTE Cat M1 / LTE Cat NB2 / EGPRS networking, applicable across global regionsOnboard 40PIN GPIO header, compatible with most Raspberry Pi HATs5 LEDs for indicating module operating statusOnboard Type-C port for easy development with just a USB Type-C cableSupports PPP, TCP, UDP, SSL, TLS, FTP(S), HTTP(S), NITZ, PING, MQTT, LwM2M, CoAP, IPv6 protocols, etc.Supports GNSS positioning (GPS, GLONASS, BDS, Galileo, QZSS)Onboard Nano SIM card slot, supports 1.8V SIM card, and is designed near the edge of the board for easy insertion and removal of SIM cardProvides tools such as QPYcom, Thonny IDE plugin, and VSCode plugin, etc. for easy learning and developmentComes with online development resources and manual (example in QuecPython)SpecificationsMODELBG95-M3EC200U-EUEC200U-AUProduct PictureApplicable RegionGlobalEurope, Middle East, Africa, Australia, New Zealand, BrazilAustralia/Latin AmericaFREQUENCY BANDLTE-FDDCat M1:B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B27, B28, B66, B85Cat NB2:B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B28, B66, B71, B85B1, B3, B5, B7, B8, B20, B28B1, B2, B3, B4, B5, B7, B8, B28, B66LTE-TDDN/AB38, B40, B41GSM / GPRS / EDGE850, 900, 1800, 1900 MHzGSM: B2, B3, B5, B8GNSSGPS, GLONASS, BDS, Galileo, QZSSBluetoothN/ABluetooth 4.2 (BR/EDR)Wi-Fi ScanN/A2.4 GHz 11b (Rx)DATA TRANSMISSIONCAT 1N/ALTE-FDD: DL 10 Mbps; UL 5 MbpsLTE-TDD: DL 8.96 Mbps; UL 3.1 MbpsNB-IoTCat NB2:DL 127 Kbps; UL 158.5 KbpsCat NB1:DL 32 Kbps; UL 70 KbpsN/ACat-MDL 588 Kbps; UL 1119 KbpsN/AGSM / GPRS / EDGEEDGE: DL 296 Kbps; UL 236.8 KbpsGPRS: DL 107 Kbps; UL 85.6 KbpsGSM: DL 85.6 Kbps; UL 85.6 KbpsOTHERSType-C USB PortSupports AT commands testing, GNSS positioning, firmware upgrading, etc.Communication ProtocolPPP, TCP, UDP, SSL, TLS, FTP(S), HTTP(S), NITZ, PING, MQTT, LwM2M, CoAP, IPv6TCP, UDP, PPP, NITZ, PING, FILE, MQTT, NTP, HTTP, HTTPS, SSL, FTP, FTPS, CMUX, MMSSIM CardNano SIM card (supports 1.8V only)Nano SIM and eSIM, dual card single standbyIndicatorSIM_CHK: lights up when a SIM card is inserted into the card slotNET: Network indicatorPSM: Sleep indicatorPWM: PWM function indicatorPWR: Power indicatorP01: Module Pin 1, default as EC200A-XX PWM0P05: Module Pin 5, NET_MODE indicatorSCK1: SIM1 detection indicator, lights up when SIM1 card is insertedSCK2: SIM2 detection indicator, lights up when SIM2 card is insertedPWR: Power indicatorButtonsPWK: Power ON/OFFPON: PSM wake-upBOOT: Forcing into firmware burning modeUSB ON/OFF: USB power consumption detection switchPWK: Power ON/OFFRST: ResetBOOT: Forcing into firmware burning modeUSB ON/OFF: USB power consumption detection switchAntenna ConnectorsLTE main antenna + DIV antenna + GNSS antennaLTE main antenna + DIV / WIFI (scanning only) / Bluetooth antenna + GNSS antennaOperating Temperature-30 ~ 75°CStorage Temperature-45 ~ 90°CType-C InterfaceEasy To Develop With Just A USB Type-C CableOnboard 40PIN GPIO HeaderCompatible With Most Raspberry Pi HATsSupports Various Development ToolsProvides Tools Such As QPYcom, Thonny IDE Plugin, And VSCode Plugin, Etc. For Easy Learning And DevelopmentWhat’s OnboardOnboard ComponentsBG95-M3 moduleTPS63020DSJR power ICTLV75533PDRVR power ICNCP114AMX180TBG power ICTXS0104EYZTR voltage level translatorNano-SIM card slotNET Network indicatorPSM Sleep indicatorPWM function indicatorPWR Power indicatorSIM_CHK indicatorlights up when SIM card is insertedPower ON/OFF buttonPSM wake-up buttonBOOT buttonPress before powering on to force firmware burning modeUSB detection ON/OFFNormally closed: USB can be connected normally;Normally open: Type-C supplies power only to the evaluation board, used for module power consumption measurement InterfacesRaspberry Pi GPIO HeaderCompatible with Raspberry Pi HATs, for more details, please refer to Pinout DefinitionPower ON/OFF jumperConnect: auto turn on, short press PWK button to restartDisconnect: short press PWK button to power on, long press to power off1.8V output jumperConnect: outputs 1.8V externallyDisconnect: used to test power consumptionModule power supply jumperConnect: DCDC to power the moduleGNSS active power supply selectionConnect: enable GNSS active power supplyUSB Type-C portMain antenna connectorAUX antenna connectorGNSS antenna connectorBattery power supply headerSupports 2.5V-5.5V battery (Note: the board cannot be powered by USB port and battery at the same time)Pinout DefinitionOutline DimensionsResources & Services PACKAGE CONTENT Weight: 0.193 kgBG95-M3 Zero x1

Price: 67.33 USD

Location: Shenzhen

End Time: 2024-10-14T06:50:28.000Z

Shipping Cost: 0 USD